Brackets That Line Up First Time
A mounting bracket's only job is to connect two things rigidly and in the right place. So the part that matters most isn't the shape — it's the bolt-hole pattern: hole positions, spacing and the mating-face flatness that decide whether it bolts straight on or fights you on site. Machined from solid plate or billet, a CNC bracket is one rigid piece (no welded distortion) with holes held true to position.
Custom Bracket Specifications
| Attribute | Capability |
|---|---|
| Materials | 6061 & 7075 aluminium, mild & alloy steel, stainless |
| Process | 3-axis & 5-axis milling from plate or billet |
| Bolt-hole position | True position from a common datum; interchangeable across a batch |
| General tolerance | ISO 2768-m / -f; ±0.025 mm on critical features |
| Finishes | Anodize (clear/black/colour), powder coat, zinc plate, bead blast |
| Quantity | One-off to production batch |
Bracket Types We Machine
- Motor & pump mounts — with concentric pilots and bolt circles
- Angle & L-brackets — structural connections
- Sensor & electronics brackets — light, precise mounts
- Motorsport & chassis brackets — billet, anodized (see automotive CNC parts)
- Machine & automation mounts — fixturing and guarding
Material & Finish Choice
6061-T6 is the default — light, strong, anodizes well. Step up to 7075-T6 for highly loaded brackets, or steel/stainless where strength or environment demands. Anodizing or powder coat adds corrosion protection and a finished look. Flatness and hole position are verified on inspection.
Replacing a cracked or discontinued bracket? Send the old one or a photo with the bolt spacing. We rebuild it to nominal — and can beef up the section or switch to a tougher alloy so it doesn't crack again. See our bolt-pattern-matched plate batch for how we hold position across a run.
Frequently Asked Questions
Yes. Send a dimensioned sketch, a photo with the bolt spacing, or the old bracket. The key info is the bolt pattern and what it mounts to; we model it and confirm before cutting.
We machine holes from a common datum to true position, so the bracket bolts straight on and every piece in a batch is interchangeable — no drilling to fit on site.
6061 aluminium usually, 7075 for high load, steel/stainless where needed. Finishes: clear/black/colour anodize, powder coat, zinc plate, bead blast.
Both. Machined from solid, a single bracket is economical with no tooling; we also run interchangeable batches for production or spares.
Quote a Custom Bracket
Sketch, photo or sample — all accepted. Reply in 24h.
RELATED PARTS