Display Module Housing Design
The display module housing frames the monitoring screen on a solar energy storage product — it must hold the display flat and in precise alignment, seal against dust and moisture (for outdoor units), and provide a mounting interface to the main enclosure or control panel. We design and manufacture these housings for both standalone display modules and integrated front-panel configurations.
Key Specifications
| Feature | Specification | Notes |
|---|---|---|
| Display cutout tolerance | ±0.1–0.15 mm | Maintains consistent bezel gap; prevents screen float |
| Mounting boss standoff height | ±0.05 mm | Keeps screen flat against housing; no rocking |
| PC window thickness | 1.5–3 mm | Thicker = more impact resistant; check display brightness |
| Bezel width | 3–8 mm typical | Narrower bezel = higher tooling precision requirement |
| Sealing (outdoor) | IP54–IP65 | Foam or O-ring seal in window-to-frame groove |
Window Options
- Polycarbonate window insert — optically flat, 1.5–3 mm; seals the aperture; recommended for all outdoor installations
- Bare cutout — no window; lowest cost; suitable for indoor-only installations with no contamination risk
- Tinted polycarbonate — reduces glare in high-ambient-light environments; still optically clear to the display
- Anti-reflection coated PC — reduces surface reflections for outdoor readability
No CAD needed. Send the display module dimensions (or the display itself), surrounding panel dimensions, and any photos. We model the housing, confirm cutout and mounting positions, then manufacture.
Display Module Structural Parts
Display housings and window bezels machined as part of solar energy system structural assemblies:
Bezels and stiffener frames are milled from 6061 plate, bead-blasted against glare, and mounted on the display's own M4 hole pattern.
Frequently Asked Questions
±0.1–0.15 mm for a consistent bezel gap. Mounting boss standoff height held to ±0.05 mm.
PC window for all outdoor or semi-outdoor installations — seals against dust and moisture, adds impact protection. Bare cutout is acceptable for indoor-only installations.
Yes. We design either a standalone module that mounts in a panel cutout, or an integrated front-panel configuration where the display bezel is part of the main housing.
Either. Many solar storage products integrate the display bezel into the front panel of the main controller housing. Others use a separate display module that mounts in a cutout in the main panel. We design either configuration — separate or integrated — based on your product's assembly and service requirements.
Yes. Send the display module dimensions (or the display itself), the surrounding panel dimensions, and any photos. We model the housing and window in CAD, confirm the cutout and mounting positions with you, then manufacture.
OTHER SOLAR ENERGY SYSTEM PAGES
Quote — Display Module Housing
Display dimensions + requirements. Engineers reply in 12h.
// Qty & price
1 pc
Sample price
Confirm fit before a run
10–50
Unit price drops
Setup cost shared
100+
Best price
All tiers quoted upfront
- →No distributor — you pay the maker directly
- →CAD saved after first order — reorder anytime at lower unit price